Uses {{{uses}}}
Color Reddish brown, gray, yellow, green, or red
Streak Reddish white
Luster Subadamantine tending to slightly resinous
Diaphaneity Translucent to transparent
Cleavage Distinct on [110], parting on {221}
Luster Subadamantine tending to slightly resinous
Hardness 5 to 5.5
Specific Gravity 3.48 to 3.60
Distinguishing Characteristics Radioactive - may be metamict
Crystal System Monoclinic
Chemical Classification {{{chemicalclassification}}}
Chemical Composition CaTiSiO5
Titanite, or sphene (from the Greek sphenos (σφηνώ), meaning wedge[1]), is a calcium titanium nesosilicate mineral, CaTiSiO5. Trace impurities of iron and aluminium are typically present. Also commonly present are rare earth metals including cerium and yttrium; calcium may be partly replaced by thorium.[2]


The International Mineralogical Association Commission on New Minerals and Mineral Names (CNMMN) adopted the name titanite and 'discredited' the name sphene[3] as of 1982,[4] although commonly papers and books initially identify the mineral using both names.[5][6] Sphene was the most commonly used name until the IMA decision, although both were well known.[1] Some authorities[7] think it is less confusing as the word is used to describe any chemical or crystal with oxidized titanium such as the rare earth titanate pyrochlores series[8] and many of the minerals with the perovskite structure.[9] The name sphene continues to be publishable in peer-reviewed scientific literature, e.g. a paper by Hayden et al. was published in early 2008 in the journal Contributions to Mineralogy and Petrology.[7] Sphene persists as the informal name for titanite gemstones.

Physical propertiesEdit

File:Titanite - Tormiq valley, Haramosh Mts, Pakistan.jpg

Titanite, which is named for its titanium content, occurs as translucent to transparent, reddish brown, gray, yellow, green, or red monoclinic crystals. These crystals are typically sphenoid in habit and are often twinned. Possessing a subadamantine tending to slightly resinous lustre, titanite has a hardness of 5.5 and a weak cleavage. Its specific gravity varies between 3.52 and 3.54. Titanite's refractive index is 1.885-1.990 to 1.915-2.050 with a strong birefringence of 0.105 to 0.135 (biaxial positive) ; under the microscope this leads to a distinctive high relief which combined with the common yellow-brown colour and lozenge-shape cross-section makes the mineral easy to identify. Transparent specimens are noted for their strong trichroism, the three colours presented being dependent on body colour. Owing to the quenching effect of iron, sphene exhibits no fluorescence under ultraviolet light. Some titanite has been found to be metamict, in consequence of structural damage due to radioactive decomposition of the often significant thorium content. When viewed in thin section with a petrographic microscope, pleochroic halos can be observed in minerals surrounding a titanite crystal.


Titanite occurs as a common accessory mineral in intermediate and felsic igneous rocks and associated pegmatites. It also occurs in metamorphic rocks such as gneiss and schists and skarns.[10] Source localities include: Pakistan; Italy; Russia; China; Brazil; Tujetsch, St. Gothard, Switzerland;[1] Madagascar; Tyrol, Austria; Renfrew County, Ontario, Canada; Sanford, Maine, Gouverneur, Diana, Rossie, Fine, Pitcairn, Brewster, New York[1] and California in the USA.


Titanite is a source of titanium dioxide, TiO2, used in pigments.

As a gemstone, titanite is usually some shade of chartreuse and is prized for its exceptional dispersive power (0.051, B to G interval) which exceeds that of diamond.Template:Citation needed

Titanite can also be used as a U-Pb geochronometer, specifically in metamorphic terranes.


  1. Cite error: Invalid <ref> tag; no text was provided for refs named Dana
  2. Deer, Howie & Zussman, (1966) , pp17-20 : 'Introduction to the Rock-Forming Minerals', 1966, ISBN 0-582-44210-9
  3. Nickel, Ernest H.; Nichols, Monte C. (2008-10-17). "IMA/CNMNC List of Mineral Names" (PDF). Material Data, Inc.. p. 280. Retrieved 2009-03-14. 
  4. Hey, M. H. (December 1982). "International Mineralogical Association: Commission on New Minerals and Mineral Names". Mineralogical Magazine 46 (341): 513–514. doi:10.1180/minmag.1982.046.341.25 doi:10.1180/minmag.1982.046.341.25. 
  5. Wenk, Hans-Rudolf; Bulakh, Andrei (May 2004). Minerals: Their Constitution and Origin. New York, NY: Cambridge University Press. ISBN 978-0-521-52958-7 ISBN 978-0-521-52958-7. 
  6. Nesse, William D. (August 2003). Introduction to Optical Mineralogy. New York, NY: Oxford University Press, USA. ISBN 978-0-19-514910-4 ISBN 978-0-19-514910-4. 
  7. 7.0 7.1 Hayden, L. A.; Watson, E. B.; Wark, D. A. (2008). "A thermobarometer for sphene (titanite)". Contributions to Mineralogy and Petrology 155 (4): 529–540. doi:10.1007/s00410-007-0256-y doi:10.1007/s00410-007-0256-y. Bibcode2008CoMP..155..529H Bibcode: 2008CoMP..155..529H. 
  8. Helean, K.B.; Ushakov, S.V.; Brown, C.E.; Navrotsky, A.; Lian, J.; Ewing, R.C.; Farmer, J.M.; Boatner, L.A. (June 2004). "Journal of Solid State Chemistry". Journal of Solid State Chemistry 177 (6): 1858–1866. doi:10.1016/j.jssc.2004.01.009 doi:10.1016/j.jssc.2004.01.009. Bibcode2004JSSCh.177.1858H Bibcode: 2004JSSCh.177.1858H. 
  9. Freitas, G.F.G.; Nasar, R.S.; Cerqueira, M.; Melo, D.M.A.; Longo, E.; Varela, J.A. (October 2006). "Luminescence in semi-crystalline zirconium titanate doped with lanthanum". Materials Science and Engineering: A 434 (1-2): 19–22. doi:10.1016/j.msea.2006.07.023 doi:10.1016/j.msea.2006.07.023. 
  10. Cite error: Invalid <ref> tag; no text was provided for refs named Handbook

Template:Commons category Template:Titanium minerals